SKU: B75

Brass Steam & Hi Temperature Normally Closed Solenoid Valve

From $308.00

Inc GST
In Stock
Make an Enquiry

A high flow / high pressure (up to 20 BAR) normally closed (power to open) piston type valve with brass forged body and Teflon seats. Mainly used as a steam valve as it will do up to 180 degrees Celsius (steam at 10 BAR) with either a flying lead or DIN plug coil. Will handle fluids up to 50 centistoke viscosity. Typical applications include high pressure irrigation, laundry equipment, hospitals, steam curing beds, boilers & general industry. Please note this is a hard PTFE seat so at low pressures/temperatures it may not give a bubble tight seal. Threads conform to ISO 7.1 Sealing Threads.

Model Port Size (BSP) Orifice ømm CV Pressure (BAR) Media Temperature Repair Kit Coil Specifications
B75-4-15-*T 1/2 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T SC-N16
DIN Plug
28 Watts
24 Volt Amps
100% ED
Class H Insulation
IP65
B75-5-20-*T 3/4 20 9.3 0.5 to 20 -10°C to 180°C RK-B75-5-T
B75-6-25-*T 1 25 13.2 0.5 to 20 -10°C to 180°C RK-B75-6-T
B75-7-35-*T 1 ¼ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T
B75-8-35-*T 1 ½ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T
B75-3-15-*TF 3/8 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T SC-H2
Flying Leads
25 watts
33 Volt Amps
100% ED
Class H Insulation
IP54
B75-4-15-*TF 1/2 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T
B75-5-20-*TF 3/4 20 9.3 0.5 to 20 -10°C to 180°C RK-B75-5-T
B75-6-25-*TF 1 25 13.2 0.5 to 20 -10°C to 180°C RK-B75-6-T
B75-7-35-*TF 1 ¼ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T
B75-8-35-*TF 1 ½ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T


*Voltages available; 12vDC, 24vDC, 24vAC, 110vAC, 240vAC, 415vAC

Please note that this valve will only do steam to 10 BAR.

For Installation and Maintenance instructions please click here or find in our References section under Valve Installation and Maintenance for Solenoid Valves.

Brass Steam/High Temperature Solenoid Valve Dimensions

Model A B C D E F G (BSP) H Weight Kg
B75-3-15-*T 75 52 129 52 45 41 3/8 14.5 1.65
B75-4-15-*T 75 52 129 52 45 41 1/2 14.5 1.65
B75-5-20-*T 85 60 141 52 45 41 3/4 18 2.13
B75-6-25-*T 100 70 148 52 45 41 1 23 2.35
B75-7-35-*T 120 90 168 52 45 41 1 1/4 33 3.85
B75-8-35-*T 120 90 168 52 45 41 1 1/2 33 3.30
B75-9-50-*T 150 122 203 52 45 41 2 40.5 7.35

All dimensions in mm unless otherwise shown.

 

Brass High Temperature Solenoid Valve Construction

Item Article Material
1 Armature Stainless Steel 304
2 Plunger Stainless Steel 304
3 Coil Brass Wire
4 Plunger Seat Teflon
5 Spring Stainless Steel 304
6 Valve Body Brass Forged
7 Piston Brass
8 Leak proof & Piston Ring Teflon

 

Size 3/8" to 2" BSP
Function Normally Closed (power to open)
Valve Operation Servo Assisted
Body Brass
Seat PTFE
Pressure Range 0.5 to 20 BAR (10 BAR Steam)
Media Steam & High Pressure Air / Oil Media

Others Also Bought

B75

Brass Steam & Hi Temperature Normally Closed Solenoid Valve

Features:

Size 3/8" to 2" BSP
Function Normally Closed (power to open)
Valve Operation Servo Assisted
Body Brass
Seat PTFE
Pressure Range 0.5 to 20 BAR (10 BAR Steam)
Media Steam & High Pressure Air / Oil Media

Description:

A high flow / high pressure (up to 20 BAR) normally closed (power to open) piston type valve with brass forged body and Teflon seats. Mainly used as a steam valve as it will do up to 180 degrees Celsius (steam at 10 BAR) with either a flying lead or DIN plug coil. Will handle fluids up to 50 centistoke viscosity. Typical applications include high pressure irrigation, laundry equipment, hospitals, steam curing beds, boilers & general industry. Please note this is a hard PTFE seat so at low pressures/temperatures it may not give a bubble tight seal. Threads conform to ISO 7.1 Sealing Threads.

Model Port Size (BSP) Orifice ømm CV Pressure (BAR) Media Temperature Repair Kit Coil Specifications
B75-4-15-*T 1/2 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T SC-N16
DIN Plug
28 Watts
24 Volt Amps
100% ED
Class H Insulation
IP65
B75-5-20-*T 3/4 20 9.3 0.5 to 20 -10°C to 180°C RK-B75-5-T
B75-6-25-*T 1 25 13.2 0.5 to 20 -10°C to 180°C RK-B75-6-T
B75-7-35-*T 1 ¼ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T
B75-8-35-*T 1 ½ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T
B75-3-15-*TF 3/8 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T SC-H2
Flying Leads
25 watts
33 Volt Amps
100% ED
Class H Insulation
IP54
B75-4-15-*TF 1/2 15 4.5 0.5 to 20 -10°C to 180°C RK-B75-4-T
B75-5-20-*TF 3/4 20 9.3 0.5 to 20 -10°C to 180°C RK-B75-5-T
B75-6-25-*TF 1 25 13.2 0.5 to 20 -10°C to 180°C RK-B75-6-T
B75-7-35-*TF 1 ¼ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T
B75-8-35-*TF 1 ½ 35 26 0.5 to 20 -10°C to 180°C RK-B75-8-T


*Voltages available; 12vDC, 24vDC, 24vAC, 110vAC, 240vAC, 415vAC

Please note that this valve will only do steam to 10 BAR.

For Installation and Maintenance instructions please click here or find in our References section under Valve Installation and Maintenance for Solenoid Valves.

.

Brass Steam & Hi Temperature Normally Closed Solenoid Valve

B75

Dimensions:

Brass Steam/High Temperature Solenoid Valve Dimensions

Model A B C D E F G (BSP) H Weight Kg
B75-3-15-*T 75 52 129 52 45 41 3/8 14.5 1.65
B75-4-15-*T 75 52 129 52 45 41 1/2 14.5 1.65
B75-5-20-*T 85 60 141 52 45 41 3/4 18 2.13
B75-6-25-*T 100 70 148 52 45 41 1 23 2.35
B75-7-35-*T 120 90 168 52 45 41 1 1/4 33 3.85
B75-8-35-*T 120 90 168 52 45 41 1 1/2 33 3.30
B75-9-50-*T 150 122 203 52 45 41 2 40.5 7.35

All dimensions in mm unless otherwise shown.

 

.

Brass Steam & Hi Temperature Normally Closed Solenoid Valve

B75

Construction:

Brass High Temperature Solenoid Valve Construction

Item Article Material
1 Armature Stainless Steel 304
2 Plunger Stainless Steel 304
3 Coil Brass Wire
4 Plunger Seat Teflon
5 Spring Stainless Steel 304
6 Valve Body Brass Forged
7 Piston Brass
8 Leak proof & Piston Ring Teflon

 

WARNING

These products are intended for use in industrial applications only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’ and in our individual ‘Series’ data sheets. Before using these products with fluids other than these specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Process Systems Pty Ltd. Through misuse, age, or malfunction, components used in industrial valve applications can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in industrial valve applications and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to the user in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings or specifications found in instruction sheets or labels packed or attached and shipped with the products. Our policy is one of continuous research and development. We therefore reserve the right to amend without notice the specifications given in this document or our individual ‘Series’ data sheets.

WARRANTY INFORMATION

All valve series and other products manufactured or distributed by Process Systems Pty. Ltd. are warranted by Process Systems to be free of defects in material and workmanship for a period of 1 year from the date of purchase or as the manufacturer warrants. Process Systems obligation under this warranty is limited to repair or replacement of the defec1ive product or refund of the purchase price paid solely at the discretion of Process Systems and provided such defective product is returned to Process Systems freight prepaid and upon examination by Process Systems such product is found defective. This warranty shall be void in the event that the product has been subject to misuse, misapplication, improper maintenance, modification or tampering. This warranty is expressed in lieu of all other warranties, expressed or implied from Process Systems Pty. Ltd. representatives or employees. Process Systems reserves the right to change Valve and Brochure specifications without notice.