Features:
Size 1/2" to 2" BSP
Body Bronze
Seat 316 Stainless Steel
Pressure Range 2 to 20 Bar
Temperature -20°C to 180°C
Feature Closed Cap
Bronze Closed Cap Pressure Relief Valve with 316 Stainless Steel Entry and Internals. Reinforced PTFE & 316 stainless steel seat. The relieving pressure is set by turning down the setting nut under the top cap. Not for Safety Relief applications.
| Model | Inlet Size (Male BSPT) | Outlet Size (Female BSPP) | Temperature Range |
|---|---|---|---|
| BPRC04-* | 1/2" | 1/2" | -20°C to 180°C |
| BPRC05-* | 3/4" | 3/4" | -20°C to 180°C |
| BPRC06-* | 1" | 1" | -20°C to 180°C |
| BPRC07-* | 1-1/4" | 1-1/4" | -20°C to 180°C |
| BPRC08-* | 1-1/2" | 1-1/2" | -20°C to 180°C |
| BPRC09-* | 2" | 2" | -20°C to 180°C |
*Setting range selectable
Capacity charts for the above models can be found here for the following Applications: Steam Air Water
| Model | Inlet Size (Male BSPT) | Outlet Size (Female BSPP) | D | L1 | L2 | H |
|---|---|---|---|---|---|---|
| BRPC04-* | 1/2" | 1/2" | 13 | 31 | 48 | 135 |
| BRPC05-* | 3/4" | 3/4" | 19 | 35 | 55 | 144 |
| BRPC06-* | 1" | 1" | 25 | 39.5 | 65 | 175 |
| BRPC07-* | 1-1/4" | 1-1/4" | 31.5 | 50.5 | 75 | 197 |
| BRPC08-* | 1-1/2" | 1-1/2" | 37 | 59 | 86 | 224 |
| BRPC09-* | 2" | 2" | 47 | 67 | 100 | 257 |
All dimensions in mm unless specified otherwise
| Item No. | Description | Material |
|---|---|---|
| 1 | Cap | CW617N |
| 2 | Adjusting Screw | SS304 |
| 3 | Nut | SS304 |
| 4 | Gasket Ring | PTFE |
| 5 | Spindle | SS304 |
| 6 | Spring | SS304 |
| 7 | Valve Body | Bronze |
| Item No. | Description | Material |
|---|---|---|
| 8 | Spring Seat | SS304 |
| 9 | Disc | SS304 |
| 10 | Gasket | PTFE |
| 11 | Buffer | SS304 |
| 12 | Gasket Ring | PTFE |
| 13 | Valve Seat | SS304 |
Size 1/2" to 2" BSP
Body Bronze
Seat 316 Stainless Steel
Pressure Range 2 to 20 Bar
Temperature -20°C to 180°C
Feature Closed Cap
-
What is a Bronze Closed Cap Pressure Relief Valve?
A Brass Closed Cap Pressure Relief Valve is a device which will relieve the internal media once a preset pressure is reached. The main body is made of Bronze with 316 Stainless Steel entry and internals. The inlet port is on the bottom of the valve while the outlet is out the side. The cap of this unit is closed (it has no easing gear).
-
How does a Bronze Closed Cap Pressure Relief Valve work?
In its simplest terms these are a relationship between the media pressure applied under the seat vs the spring pressure applied above the seat. Once the media pressure that is acting on the underside of the seat is greater than the force applied on the top of the seat by the spring tension then it will rise opening the inlet to the outlet. Once this pressure decreases and the force of the spring is greater then it will be lowered back down closing off the flow. The spring tension can be adjusted within its setting range by loosening the locking nut and then tightening or loosening the spindle.
-
How do I know that a Bronze Closed Cap Pressure Relief Valve is the right valve for me?
The first thing to check is whether you are after a Pressure Relief Valve such as this model or a safety valve. The main difference is these pressure relief valves will be lifted off their seat gradually as the pressure increases and may not fully open unless the spring is all the way compressed into the roof cavity. A safety valve on the other hand will reach its full flow as soon as the setting pressure is reached. Once you are happy with selecting this pressure relief you need to make sure the setting pressure is within the range selected and the media and temperature are applicable with the materials in the valve. There are other external factors such as environment but once you have selected the above you are well on your way to choosing the right valve for your application.
-
How long will my Bronze Closed Cap Pressure Relief Valve last?
Like any valve this depends upon the usage case, duty cycle and external environment of the valve. The pressure, temperature and characteristics of the media (eg. is it corrosive, clean etc) will have a large bearing on how long your valve lasts. If your valve is cycling every second, 24 hours a day then its life will be shorter than one which is used once a day.
-
What are typical uses of a Bronze Closed Cap Pressure Relief Valve ?
These are primarily used to vent pressure from a system once it reaches a certain point. This covers a very wide range of applications however they are not used on pressure vessels such as boilers where a safety valve is needed (reaches full capacity as soon as the set point is reached).
-
How do I set and install my Bronze Pressure Relief Valve?
If your Pressure Relief Valve is not preset you will need to set your relief point. This can be done either in the line if it is safe to do so or on a test rig. Alternatively it can be done on a compressor with a regulator to vary the pressure. You will need to adjust the stem clockwise or anti clockwise depending upon whether you are increasing or decreasing the set point. Once it is reached, tighten the locking nut to keep this position then put the cap back on the valve. It can now be installed in the line. The inlet thread is tapered BSP so thread tape or sealant must be used to make a seal. The outlet may be vented to atmosphere or piped back to a reservoir depending upon your media.
-
How long will my product take to get to me?
This depends upon where you are based and the freight method chosen. If the express freight option is selected it is usually next day delivery to metropolitan areas in Australia for under 5kg. If free freight has been selected it will go by road freight which can be anywhere from 1 to 10 days depending upon your location. It usually averages 3 days. You can rely on us to do everything to despatch your order the same day we receive it, this is what we do.
-
What warranty do I get?
We have been manufacturing Valves for over 30 years so we have a lot of experience at making a great valve. All of our products come standard with a 12 month warranty from invoice date. The good news is we have very strict quality controls and all pressure relief valves leave our warehouse tested (full material and testing certificates are available) and inspected so there are rarely any issues. Also once your valve is in and operating it will most likely continue to do so for a very long time barring any debris getting caught in the valve.
